System Specifications:
Description: Wi-Fi connected, battery powered, ADC/DAC/DIO system board with Wi-Fi to UART and I2C bus bridge capabilities.
Dimensions:
Board: 2.15” x 1.5”.
Package with Battery: 2.25” x 1.6” x 0.75” (optional).
Power:
Charging: Micro USB, 5V.
Battery: Li-Ion, 3.7V, 850mAh.
Time of operation on battery power: 2 hours at full data acquisition and transfer speed.
Interface:
- Wi-Fi for System Commands, and Data transfer.
- Serial UART for Wi-Fi Module Configuration.
- UART cable replacement over Wi-Fi. (Wi-Fi to UART bridge)
- System programming interface for embedded microprocessor (internal factory use).
- USB for Bootloader and optional communication (optional).
- I2C Bus, Auxiliary System Management header (Wi-Fi to I2C bridge).
Integrated functions:
- 6-Axis of freedom (6DOF) dynamic sensor. 16-bit resolution.
- 3-Axis Accelerometer: +/-4g, +/-8g, +/-16g, +/-32g range.
- 3-Axis Gyroscope: +/-500d/sec. +/-1000d/sec, +/-2000d/sec, +/-4000d/sec.
- Temperature sensor
- 4-Channel ADC, unipolar 0V to 5V, input. 12-bit resolution
- 4-Chanel DAC, unipolar 0V to 2.048V, output. 12-bit resolution.
- 3-bit Digital I/O
- Battery status.
- Charge connect status.
Communication API:
Communication API for 6DOF sensor:
- Sensitivity setup.
- Sensor’s data acquisition sample rate setup.
- Sensor’s data acquisition sample content setup.
- Single sample/Continuous sampling, Start/Stop.
Communication API for ADC/DAC/DIO:
- ADC sample rate setup.
- ADC data acquisition Single sample/Continuous sampling, Start/Stop.
- DAC output setup.
- Special Function Digital IO (per customer request)
Communication API for Auxiliary I2C Bus:
- Complex command
- Device address
- Write Payload
- Read Payload, packet on demand.
- Read Payload, packet stream. Timer based, max 200 reads/sec.
Android/Windows Applications for control, communication and data acquisition and display.
Application source code for Module Microprocessor and Android/Windows available under licensing agreement.